| Description |
Instrument cluster configuration not implemented |
| Detection condition |
- The auto leveling control module received a signal which indicates the instrument cluster configuration is not performed.
|
| Fail-safe |
- The headlight leveling actuator is stopped at the position when the malfunction is determined.
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the auto leveling control module to the auto leveling control module, 30 s or more
need to have elapsed since the ignition was switched ON (engine off or on).
- Instrument cluster configuration is not completed.
- Instrument cluster malfunction
- Auto leveling control module malfunction
|
| System wiring diagram |
Not applicable |