FixVault

Auto Open Operation Not Performed: Notes

Description 
  • Auto open operation is not performed with the ignition switched ON (engine off or on).
Possible Causes 
  • Liftgate opener switch malfunction
  • Liftgate latch and lock actuator malfunction
  • Power liftgate (PLG) front switch malfunction
  • Remote transmitter malfunction
  • Power liftgate (PLG) drive unit malfunction
  • Power liftgate (PLG) control module malfunction
  • Open circuit in wiring harness between the following terminals:
    • Power liftgate (PLG) control module terminal 1Z and liftgate opener switch terminal C
    • Power liftgate (PLG) control module terminal 1AC and power liftgate (PLG) front switch terminal J
    • Power liftgate (PLG) control module terminal 1Y and power liftgate (PLG) front switch terminal I
  • Short to ground in wiring harness between the following terminals:
    • Power liftgate (PLG) control module terminal 1Z and liftgate opener switch terminal C
    • Power liftgate (PLG) control module terminal 1AC and power liftgate (PLG) front switch terminal J
    • Power liftgate (PLG) control module terminal 1Y and power liftgate (PLG) front switch terminal I