Using the M-MDS

Connect the M-MDS to the DLC-2.
After vehicle identification, select the following from the M-MDS initialization screen.
1. Select "Data logger"
2. Select "Module"
3. Select "IC"

Using the simulation function SPEEDOMETER, verify that the values are as indicated in the table.

M-MDS display	Speedometer display
60 km/h	Speedometer needle moves to approx. 57.75-62.25 km/h {35.89-38.68 mph}.
120 km/h	Speedometer needle moves to approx. 117-123 km/h {72.8-76.4 mph}.
Off	Speedometer needle moves to the bottommost position.

If not as indicated in the table, replace the instrument cluster. (Refer to INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)