FixVault
Home › Mazda › 2016 › MX-5 Miata Club, Automatic Trans › Repair and Diagnosis › Electrical › Charging Systems › Generator Disassembly/Assembly › Brush Disassembly Note

Brush Disassembly Note

CAUTION:
  • Melt the solder quickly, otherwise the diodes (rectifier) and regulator will be damaged by excessive heat.
Fig 1: Identifying Regulator Component And Soldered Area (Brush Disassembly)
G10951911Courtesy of MAZDA MOTORS CORP.
  1. Melt the solder and remove the brush from the regulator component.
About FixVault