| Possible Causes |
- Trunk lid opener switch malfunction
- Trunk lid release actuator malfunction
- Trunk lid latch switch malfunction
- Open circuit in wiring harness between the following terminals:
- BCM terminal 2S and trunk lid opener switch terminal A
- LF control unit terminal A and request switch (RF) terminal D
- LF control unit terminal C and request switch (LF) terminal D
- Start stop unit terminal 1P and door lock link switch (driver's side) terminal D
- Start stop unit terminal 1AF and ground
- Start stop unit terminal 2A and ground
- Start stop unit terminal 2B and ground
- Short to ground in wiring harness between start stop unit terminal 1P and door lock link switch (driver's side) terminal D
- Connector poor contact or terminal damage
- Customer's mis-operation or misunderstanding
|