FixVault
Home › Mazda › 2017 › 3 Sport, 4D Hatchback, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Camshaft Position (CMP) Sensor Removal/Installation › Exhaust CMP Sensor

Exhaust CMP Sensor

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Disconnect the exhaust CMP sensor connector.
  3. Remove the exhaust CMP sensor.
    Fig 1: Removing Exhaust CMP Sensor
    G11450581Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault