Charging System - Engine

• Battery Inspection [SKYACTIV-G 2.0, SKYACTIV-G 2.5]
  • Notes
  • Using Electrolyte Specific Gravity Method [Without i-ELOOP]
  • Using Electrolyte Specific Gravity Method (With i-ELOOP)
  • Using Battery Voltage Method (Without i-ELOOP Only)
  • Standard specification
  • Parasitic Draw Inspection
• Battery Recharging [SKYACTIV-G 2.0, SKYACTIV-G 2.5]
  • Notes
  • Using GR8-1291 (Without i-ELOOP)
  • Without Using GR8-1291 (Without i-ELOOP)
  • Without Using GR8-1291 (With i-ELOOP)
• Battery Removal/Installation [SKYACTIV-G 2.0, SKYACTIV-G 2.5]
  • Operation After Replacing Battery (With i-ELOOP)
  • Battery Removal/Installation
  • Battery Removal Note
  • Battery Tray and PCM Component Removal Note
  • Battery Box Installation Note
• CHARGING SYSTEM LOCATION INDEX [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-ELOOP)]
• GENERATOR DISASSEMBLY/ASSEMBLY [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-ELOOP)]
  • Notes
  • Brush Disassembly Note
  • Brush Assembly Note
• GENERATOR INSPECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-ELOOP)]
  • Notes
  • Charging System Warning Light
  • Generator
    • Generator Voltage inspection
    • Generator current inspecton
  • Generator internal parts
    • Rotor
    • Stator coil
    • Brush
    • Brush spring
    • Rectifier (Using an analog circuit tester)
    • Rectifier (Using a digital circuit tester)
    • Bearing
• GENERATOR REMOVAL/INSTALLATION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-ELOOP)]
  • Notes
  • Generator Removal Note
  • Generator Installation Note
• Negative Battery Cable Disconnection/Connection [SKYACTIV-G 2.0, SKYACTIV-G 2.5]
  • Notes
  • Required Procedure After Negative Battery Cable Disconnection/Connection
  • Without i-ELOOP
    • Negative battery cable terminal disconnection
    • Negative battery cable terminal connection
  • With i-ELOOP
    • Negative battery cable terminal disconnection
    • Negative battery cable terminal connection