FixVault
Home › Mazda › 2017 › 5 GS, Automatic Trans › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine Mechanical System › Drive Belt Removal/Installation

Drive Belt Removal/Installation

  1. Remove the aerodynamic under cover and splash shield as a single unit. (See AERODYNAMIC UNDER COVER REMOVAL/INSTALLATION .) (See SPLASH SHIELD REMOVAL/INSTALLATION .)
  2. Rotate the drive belt auto tensioner in the direction shown in the figure and remove the drive belt.
    G13726525Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
About FixVault