FixVault
Home › Mazda › 2017 › 5 GS, Automatic Trans › Repair and Diagnosis › General Information › Reset Procedures › Tire Pressure Monitor Systems › TPMS Reset Procedures › Tire Pressure Sensor Registration › Without M-MDS scan tool

Without M-MDS scan tool

  1. Turn ignition switch to ON position, then turn it back to LOCK position.
  2. Leave the vehicle with the engine off, and wait for 15 minutes or more.
  3. After 15 minutes, drive vehicle at a speed of at least 16 mph (25 km/h) for 10 minutes or more. Tire pressure sensor ID registration is completed when the TPMS warning light turns OFF.
    NOTE: If vehicle is driven before 15 minutes of changing tires, the TPMS warning light will flash because the sensor ID signal code will not have been registered yet. If this happens, park the vehicle for 15 minutes or more, after which sensor ID signal code will register upon driving vehicle for 10 minutes or more.
About FixVault