FixVault
Home › Mazda › 2017 › 5 GS, Automatic Trans › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Front Shock Absorber And Coil Spring Disassembly/Assembly › Bearing Installation Note

Bearing Installation Note

  1. Install the bearing by hooking the upper end of the dust boot to the bearing lip.
    G13726973Courtesy of MAZDA MOTORS CORP.
  2. Align the projection A on the lower part of the shock absorber with the bearing projection B.
G13726974Courtesy of MAZDA MOTORS CORP.
About FixVault