FixVault
Home › Mazda › 2017 › 5 GS, Automatic Trans › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle (Service Information) › Oil Pressure Switch Inspection › Part Inspection

Part Inspection

  1. Apply air pressure of 400-440 kPa {4.08-4.48 kgf/cm2 , 58.1-63.8 psi} to the oil pressure switch as shown in the figure.
    G13727463Courtesy of MAZDA MOTORS CORP.
  2. Measure continuity between oil pressure switch terminal A and the thread area.
    G13727462Courtesy of MAZDA MOTORS CORP.
    • If there is any malfunction, replace the oil pressure switch.
About FixVault