FixVault

Manual Transaxle Installation Note

WARNING:
  • Install the transaxle carefully, holding it steady. If the transaxle falls it could be damaged or cause injury.
  1. Set the transaxle on a jack and lift into place.
    G13727360Courtesy of MAZDA MOTORS CORP.
  2. Install the transaxle mounting bolts.
    G13727361Courtesy of MAZDA MOTORS CORP.

    Tightening torque 

    37-52 N.m {3.8-5.3 kgf.m, 28-38 ft.lbf}

  3. Adjust the SST (49 C017 5A0) so that the engine is located at the specified position.