Setting method by operation of remote transmitter button

• The following setting can be changed by operation of the remote transmitter button.

Function	Initial setting	Setting content	Control unit
2-step unlocking function.(1)	ON	OFF/ON	Start stop unit
(1) With 2-step unlocking function.

• Change the setting for the 2-step unlocking function referring to the following procedure:

NOTE:

• If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
  • The ignition is switched to ACC or ON (engine off or on).
  • The driver's door is closed.
  • The trunk lid is open.
  • The remote transmitter operation is not performed for approx. 10 s.
  • The lock button on the remote transmitter is pressed.
  • A request switch is pressed.

Fig 1: 2-Step Unlocking Function Setting Changing Procedure Flowchart

Courtesy of MAZDA MOTORS CORP.