DTC C0051-28; C0051-67; EPS Control Module: Notes
DETECTION CONDITION & POSSIBLE CAUSE
| DTC |
C0051:28, C0051:67 |
EPS control module |
| DETECTION CONDITION |
- C0051:28
- DSC HU/CM detects steering angle neutral position error.
- C0051:67
- DSC HU/CM receives steering angle neutral position reset signal after neutral position was set.
|
| FAIL-SAFE FUNCTION |
|
| POSSIBLE CAUSE |
- EPS control module malfunction
- Signal errors from EPS control module due to rough road driving
- DSC HU/CM malfunction
- Poor connection at connectors (female terminal)
|
| SYSTEM WIRING DIAGRAM |
- |