FixVault
Home › Mazda › 2017 › 6 Touring, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 45 (Security And Lock System) › Trunk Lid Lock Striker Removal/Installation

Trunk Lid Lock Striker Removal/Installation

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the following parts:
    1. Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION .)
    2. Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION .)
    3. Trunk side pocket (See TRUNK SIDE POCKET REMOVAL/INSTALLATION .)
    4. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  2. Remove the bolts, then remove the trunk lid lock striker.
  3. Install in the reverse order of removal.
  4. Adjust the trunk lid. (See TRUNK LID ADJUSTMENT .)
    Fig 1: Trunk Lid Lock Striker With Mounting Bolts With Torque Specifications
    G09787784Courtesy of MAZDA MOTORS CORP.
About FixVault