Possible Cause
WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Trunk lid opener switch malfunction
- Open circuit in wiring harness between the following terminals:
- Rear body control module (RBCM) terminal 4M and trunk lid opener switch terminal C
- LF control unit terminal G and request switch (LF) terminal D
- LF control unit terminal E and request switch (RF) terminal D
- Start stop unit terminal 1P and door lock link switch (driver's side) terminal D
- Start stop unit terminal 1AF and ground
- Start stop unit terminal 2B and ground
- Short to ground in wiring harness between start stop unit terminal 1P and door lock link switch (driver's side) terminal D
- Connector poor contact or terminal damage
- Customer's mis-operation or misunderstanding