Continuity Inspection

Verify that the CPP switch is installed properly. (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION .)
Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Disconnect the CPP switch connector.

Verify that the continuity between CPP switch terminals A and B when the clutch pedal is depressed and when it is released is according to the following table:

Fig 1: Locating Rod On CPP Switch

Courtesy of MAZDA MOTORS CORP.

CLUTCH PEDAL CONTINUITY

Clutch pedal position	Continuity
Clutch pedal released (Rod is pressed.)	No continuity
Clutch pedal depressed (Rod is pressed.)	Continuity detected

If not as verified, replace the CPP switch. (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION .)