FixVault
Home › Mazda › 2017 › 6 Touring, Standard Trans › Repair and Diagnosis › Transmission › Manual Trans › Manual Transaxle - Overhaul [C66M-R] › Secondary Shaft Component Assembly › Synchronizer Key Assembly Note

Synchronizer Key Assembly Note

  1. Align with the direction of the synchronizer key as shown in the figure, and assemble the clutch hub.
    Fig 1: Identifying Synchronizer Key Aligning Position
    G08347889
  2. After the synchronizer key is assembled, verify that the detent ball of the synchronizer key is engaged with the positioning groove of the clutch hub sleeve.
    Fig 2: Identifying Positioning Groove Of Clutch Hub Sleeve
    G08347890
About FixVault