FixVault
Home › Mazda › 2017 › CX-3 Grand Touring, AWD › Repair and Diagnosis › Brakes › Traction Control › Dynamic Stability Control System (Service Information) › DSC HU/Cm Inspection › Notes

DSC HU/Cm Inspection: Notes

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Disconnect the DSC HU/CM connector. (See DSC HU/CM REMOVAL/INSTALLATION .)
  3. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  4. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect voltage, continuity, or resistance according to the Terminal Voltage Table (Reference) on the table.
About FixVault