Active Driving Display Inspection: Inspection

1. Connect the M-MDS to the DLC-2.
2. After vehicle identification, select the following from the M-MDS initialization screen.
   1. "Data logger"
   2. "Module"
   3. "IC"
3. Using the simulation function LCD_SEG, verify that the display screen and open/close angle for the combiner change by pressing the tripmeter switch.

Number of times tripmeter switch is pressed	Display screen	Combiner open/close angle
-	Courtesy of MAZDA MOTORS CORP.	Courtesy of MAZDA MOTORS CORP.
1 time	Courtesy of MAZDA MOTORS CORP.	Courtesy of MAZDA MOTORS CORP.
2 times	Courtesy of MAZDA MOTORS CORP.	Courtesy of MAZDA MOTORS CORP.
3 times	Courtesy of MAZDA MOTORS CORP.	Courtesy of MAZDA MOTORS CORP.
4 times	Courtesy of MAZDA MOTORS CORP.	Courtesy of MAZDA MOTORS CORP.
5 times	Courtesy of MAZDA MOTORS CORP.	Courtesy of MAZDA MOTORS CORP.
6 times (1)	Courtesy of MAZDA MOTORS CORP.	Courtesy of MAZDA MOTORS CORP.
(1) Because the combiner open/close angle cannot change if the tripmeter switch is pressed before the combiner fully closes, press the tripmeter switch after the combiner is fully closed.

• If the display screen and open/close angle for the active driving display cannot be changed, refer to the symptom troubleshooting. (See SYMPTOM TROUBLESHOOTING [INSTRUMENT CLUSTER] .)