FixVault
Home › Mazda › 2017 › CX-3 Touring, FWD › Repair and Diagnosis › Electrical › Charging Systems › Generator Disassembly/Assembly › Brush Disassembly Note

Brush Disassembly Note

CAUTION:
  • Melt the solder quickly, otherwise the diodes (rectifier) and regulator will be damaged by excessive heat.
Fig 1: Regulator Component And Soldered Area
G11435558Courtesy of MAZDA MOTORS CORP.
  1. Melt the solder and remove the brush from the regulator component.
About FixVault