DTC B00A0:81/B00A0:87 [SAS Control Module (Two-Step Deployment Control System - Us/CANADA Spec.)]: Notes
DTC B00A0:81/B00A0:87 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.)] - DETECTION CONDITION & POSSIBLE CAUSE
| System malfunction location |
- B00A0:81:Occupant classification sensor memory check sum error
- B00A0:87:Signal reception error from occupant classification sensor
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Error signal is detected between SAS control module and occupant classification sensor
- The SAS control module could not receive CAN signal from the occupant classification sensor for 1 s or more.
|
| Fail-safe |
Not applicable |
| Possible cause |
- Malfunction in CAN line between the SAS control module and occupant classification sensor
|
| System wiring diagram |
Not applicable |