DTC B00D5:55 [SAS Control Module (Two-Step Deployment Control System - Us/CANADA Spec.)]: Notes
DTC B00D5:55 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.)] - DETECTION CONDITION & POSSIBLE CAUSE
| System malfunction location |
- Configuration setting error (PAD indicator structural malfunction)
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
- Parts which have not been set to SAS control module are assembled
|
| Fail-safe |
- |
| Possible cause |
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- Indicator unit assembly incorrect
- SAS control module malfunction
|
| System wiring diagram |
- |