FixVault
Home › Mazda › 2017 › CX-9 Signature › Repair and Diagnosis › External Pages › Different car › Section 10 (Air Bag System (Service Information) - Two-Step Deployment Control System) › Clock Spring Removal/Installation [Two-Step Deployment Control System] › Clock Spring Connector A Disconnect Note

Clock Spring Connector A Disconnect Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull out the clock spring connector A lock lever in the direction of arrow (1) shown in the figure.
    Fig 1: Removing Clock Spring Connector A Lock Lever From Clock Spring
    G11539224Courtesy of MAZDA MOTORS CORP.
  2. Move the clock spring connector A in the direction of arrow (2) shown in the figure to disconnect it.
About FixVault