Section 2 (Engine Control System)
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Accelerator Pedal Position (App) Sensor Inspection
- Accelerator Pedal Position (App) Sensor Removal/Installation
- Air Fuel Ratio (A/F) Sensor Inspection
- Air Fuel Ratio (A/F) Sensor Removal/Installation
- Barometric Pressure (BARO) Sensor Inspection
- Barometric Pressure (BARO) Sensor Removal/Installation
- Camshaft Position (CMP) Sensor Inspection
- Camshaft Position (CMP) Sensor Removal/Installation
- Clutch Pedal Position (CPP) Switch Inspection
- Clutch Stroke Sensor Inspection
- Control System Diagram
- Control System Location Index
- Control System Wiring Diagram
- Crankshaft Position (CKP) Sensor Inspection
- Crankshaft Position (CKP) Sensor Removal/Installation
- Current Sensor Inspection
- Current Sensor Removal/Installation
- Engine Coolant Temperature (ECT) Sensor Inspection
- Engine Coolant Temperature (ECT) Sensor Removal/Installation
- Engine Oil Data Reset
- Fuel Pressure Sensor Inspection
- Fuel Pressure Sensor Removal/Installation
- Fuel Tank Pressure Sensor Inspection
- Fuel Tank Pressure Sensor Removal/Installation
- Heated Oxygen Sensor (Ho2S) Inspection
- Heated Oxygen Sensor (Ho2S) Removal/Installation
- Intake Air Temperature (IAT) Sensor Inspection
- Ion Sensor Inspection
- Ion Sensor Removal/Installation
- Knock Sensor (KS) Inspection
- Knock Sensor (KS) Removal/Installation
- Manifold Absolute Pressure (Map) Sensor Inspection
- MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR No. 2 REMOVAL/INSTALLATION
- Mass Air Flow (MAF) Sensor Inspection
- MASS AIR FLOW (MAF) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR No. 1 REMOVAL/INSTALLATION
- Neutral Switch Inspection
- Pcm Configuration (Using As-Built Data)
- Pcm Configuration (Using Read/Write Function)
- Pcm Inspection
- Without Using the M-MDS
- Notes
- Terminal voltage table (Reference)
- Inspection Using An Oscilloscope (Reference)
- Electric variable valve timing motor (rotation direction) signal
- Electric variable valve timing motor (rotation pulse) signal
- Exhaust CMP signal
- Intake CMP signal
- CKP signal
- Electric variable valve timing driver (diagnostic) signal
- Generator output voltage
- Purge control
- IGT1, IGT2, IGT3, IGT4 control
- Hydraulic variable valve timing control signal
- Engine oil control signal
- Electric variable valve timing control signal
- Generator field coil control signal
- A/F sensor heater control signal
- Drive-by-wire control (+) signal
- Fuel injection control (-) signal
- Fuel injection control (+) signal
- High pressure fuel pump control (+) signal
- High pressure fuel pump control (-) signal
- HO2S heater control signal
- Fuel pump control signal
- Fuel pump control module (diagnostic) signal
- Using The M-MDS
- Without Using the M-MDS
- Pcm Removal/Installation
- Throttle Position (TP) Sensor Inspection
- Throttle Position (TP) Sensor Removal/Installation