FixVault
Home › Mazda › 2017 › CX-9 Signature › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Control System - Auto A/C › Ambient Temperature Sensor Removal/Installation

Ambient Temperature Sensor Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the seal board upper. (See SEAL BOARD UPPER REMOVAL/INSTALLATION .)
  3. Remove the front bumper. (See FRONT BUMPER REMOVAL .) (See FRONT BUMPER INSTALLATION .)
  4. Disconnect the connector.
    Fig 1: Ambient Temperature Sensor Connector Location
    G11433637Courtesy of MAZDA MOTORS CORP.
  5. Remove the clip.
    Fig 2: Removing Ambient Temperature Sensor Clip
    G11433638Courtesy of MAZDA MOTORS CORP.
  6. Remove the ambient temperature sensor.
  7. Install in the reverse order of removal.
About FixVault