FixVault
Home › Mazda › 2017 › MX-5 Miata Club, Automatic Trans › Repair and Diagnosis › Electrical › Charging Systems › Generator Disassembly/Assembly › Brush Disassembly Note

Brush Disassembly Note

CAUTION:
  • Melt the solder quickly, otherwise the diodes (rectifier) and brush holder will be damaged by excessive heat.
Fig 1: Identifying Brush Holder And Soldered Area
G11274118Courtesy of MAZDA MOTORS CORP.
  1. Melt the solder and remove the brush from the brush holder.
About FixVault