Radiator Removal Note

CAUTION:

Always use two people when removing/installing the radiator, with one person supporting the radiator. Otherwise, the radiator could fall off and be damaged.

Remove the bolts shown in the figure below.

Fig 1: Identifying Radiator And Bolts
Courtesy of MAZDA MOTORS CORP.
CAUTION:
- When removing the radiator, the condenser bracket is caught on the urethane which damages the urethane. Always install new urethane after removing the radiator. (See RADIATOR INSTALLATION NOTE ).
Fig 2: Removing Urethane
Courtesy of MAZDA MOTORS CORP.
Remove the radiator.
If the radiator is to be reused, perform the following procedure:
1. Completely remove the urethane.
2. Clean the urethane installation surface.