FixVault
Home › Mazda › 2018 › 6 Sport, 2.5L Eng VIN 5 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (VIN 5) › Pcm Removal/Installation › PCM Cover Installation Note

PCM Cover Installation Note

  1. Insert the PCM cover end into area A shown in the figure below.
    Fig 1: Inserting PCM Cover End
    G09074543Courtesy of MAZDA MOTORS CORP.
  2. Temporarily tighten the two bolts, then completely tighten them.
About FixVault