Control Cables (Shift Lever Side) Installation Note
- Verify that the shift lever is in the neutral position.
- Connect the control cables to the shift lever.
Courtesy of MAZDA MOTORS CORP.
- Connect the control cable end (shift side) to the shift lever as shown in the figure.
Courtesy of MAZDA MOTORS CORP.
NOTE:
- Because the vehicle may have been moved during the servicing, verify that the shift lever is in neutral again.
- Verify that the shift lever and the manual transaxle are in the neutral position.
- Shift the shift lever to fourth gear.
- Press in the lock piece in the direction shown in the figure. (1 in Fig.)
Courtesy of MAZDA MOTORS CORP.
- Press Up the safety lock in the direction shown in the figure. (2 in Fig.)