Maintenance Monitor Operation Procedure: Notes
WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The maintenance monitor displays a message when any of the following display conditions are met based on the preset maintenance period.
Display condition
- Day setting: Remaining days are 15 days, 3 days, 0 days
- Distance setting: Remaining distance is 1000 km {500 mile}
- The instrument cluster displays a message at approx. 5 s intervals according to the following priority order when multiple display conditions are met.
- Scheduled maintenance
- Tire rotation
- Oil inspection/replacement
- The maintenance monitor setting information recorded in the Connectivity master unit (Control Module Unit) cannot be written to a new Control Module Unit, therefore, the maintenance monitor is set to the initial setting value if the Control Module Unit is replaced. Before replacing the Control Module Unit, explain to the customer that the maintenance monitor is reset to the initial setting value.
- After implementing the maintenance, reset the maintenance monitor items that were implemented.