FixVault
Home › Mazda › 2018 › CX-3 Touring, AWD › Repair and Diagnosis › External Pages › Different car › Section 143 (Glass/Windows/Mirrors) › Power Window Subswitch Removal/Installation › Front

Power Window Subswitch Removal/Installation: Front

WARNING: This page is about a different car, the 2018 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  3. Move the power window subswitch cover end in the directions of arrows (1) shown in the figure using a remover tool, and detach the tabs from the power window subswitch cover.
    Fig 1: Moving Power Window Subswitch Cover End In Direction
    G12183778Courtesy of MAZDA MOTORS CORP.
  4. Remove the power window subswitch in the direction of arrow (2) shown in the figure.
  5. Install in the reverse order of removal.
About FixVault