Battery Tray Installation Note

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.

Set the battery tray to the installation position.
Tighten the battery tray installation bolts in the order shown in the figure.

Fig 1: Battery Tray Installation Bolts Tightening Sequence
Courtesy of MAZDA MOTORS CORP.

Tightening torque

22 - 30 N.m {2.3 - 3.0 kgf.m, 17 - 22 ft.lbf}
Install the rubber at the two locations on the air cleaner component to the battery tray.

Fig 2: Rubber, Air Cleaner And Battery Tray

Courtesy of MAZDA MOTORS CORP.