Brush Assembly Note

WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Melt the solder quickly, otherwise the diodes (rectifier) and brush holder will be damaged by excessive heat.

Fig 1: Caution - Melt Solder Quickly, Otherwise Diodes (Rectifier) And Brush Holder Will Be Damaged By Excessive Heat

Courtesy of MAZDA MOTORS CORP.

Press the brush into the brush holder with it facing in the direction shown in the figure.

Fig 2: Pressing Brush Into Brush Holder
Courtesy of MAZDA MOTORS CORP.
Solder the brush to the brush holder.