DSC HU/Control Module Inspection: Notes
WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the DSC HU/Control Module connector. (See DSC HU/Control Module REMOVAL/INSTALLATION .)
- Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Attach the tester lead to the DSC HU/Control Module wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table.
- If not specified, replace the DSC HU/Control Module. (See DSC HU/Control Module REMOVAL/INSTALLATION .)