FixVault
Home › Mazda › 2018 › CX-5 Touring, AWD › Repair and Diagnosis (Single Page) › Brakes › Traction Control › Dynamic Stability Control System (Service Information) › DSC HU/Control Module Removal/Installation [SKYACTIV-G 2.5 (VIN M)] › DSC HU/Control Module Connector Installation Note

DSC HU/Control Module Connector Installation Note

  1. Connect the connector and pull the lock lever up in the direction of the arrow.
    Fig 1: Pulling Lock Lever Up
    G11426987Courtesy of MAZDA MOTORS CORP.
  2. After connecting the connector, verify that the connector cover is completely pushed in.
About FixVault