FixVault
Home › Mazda › 2018 › CX-5 Touring, AWD › Repair and Diagnosis › Brakes › Traction Control › Dynamic Stability Control System (Service Information) › DSC HU/Control Module Removal/Installation [SKYACTIV-G 2.5 (VIN M)] › Brake Pipe Removal Note

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC HU/Control Module.
    Fig 1: Placing Alignment Mark On Brake Pipe And DSC HU/Control Module
    G11426984Courtesy of MAZDA MOTORS CORP.
  2. Apply protective tape to the connector to prevent brake fluid from entering.
  3. Disconnect the brake pipes.
About FixVault