FixVault
Home › Mazda › 2018 › CX-5 Touring, AWD › Repair and Diagnosis › Engine Performance › System › On-Board Diagnostic - Engine Control - Introduction (2 Of 2) › Clearing DTC

Clearing DTC

  1. Connect the M-MDS to the DLC 2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

    (1)Select "Self Test". (2) Select "Modules". (3) Select "PCM".

  3. Then, select the "Retrieve CMDTCs" and perform procedures according to the directions on the M-MDS screen.
  4. Verify the DTC according to the directions on the M-MDS screen.
  5. Press the clear button on the DTC screen to clear the DTC.
  6. Verify that no DTCs are displayed.
  7. Switch the ignition off.
About FixVault