FixVault
Home › Mazda › 2018 › CX-5 Touring, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Camshaft Position (CMP) Sensor Removal/Installation › Intake CMP Sensor

Intake CMP Sensor

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the plug hole plate. (See Plug Hole Plate Removal/Installation .)
  3. Disconnect the intake CMP sensor connector.
  4. Remove the intake CMP sensor.
    Fig 1: Intake CMP Sensor And Bolt With Torque Specification
    G12184569Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
About FixVault