FixVault
Home › Mazda › 2018 › CX-9 Signature › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Inner Handle Removal/Installation › Rear Inner Handle

Rear Inner Handle

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the door lock knob cable and the inner handle cable from the rear inner handle.
    Fig 1: Rear Inner Handle And Door Lock Knob Cable
    G11432719Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault