FixVault
Home › Mazda › 2018 › CX-9 Signature › Repair and Diagnosis › Brakes › Traction Control › Dynamic Stability Control System (Service Information) › DSC HU/Control Module Removal/Installation › Brake Pipe Installation Note

Brake Pipe Installation Note

  1. Align the marks made before removal and install the brake pipe to the DSC HU/Control Module and brake pipe joint referring to the figure.
    Fig 1: DSC HU/Control Module Components
    G11433112Courtesy of MAZDA MOTORS CORP.
  2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
About FixVault