FixVault
Home
›
Mazda
›
2018
›
CX-9 Signature
›
Repair and Diagnosis
›
External Pages
›
Different car
›
Section 23 (Dynamic Stability Control System (Service Information))
›
Front Abs Wheel-Speed Sensor Removal/Installation
›
Connector Disconnection Note
Connector Disconnection Note
WARNING:
This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
Remove the fasteners.
Fig 1: Removing Front Mudguard With Fasteners
Courtesy of MAZDA MOTORS CORP.
Peel back the front mudguard and disconnect the connector.