FixVault
Home › Mazda › 2018 › CX-9 Signature › Repair and Diagnosis › External Pages › Different car › Section 9 (Glass/Windows/Mirrors) › Rear Power Window Motor Removal/Installation › Notes

Rear Power Window Motor Removal/Installation: Notes

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully open the rear door glass.
  2. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
  4. Remove the rear door speaker. (See REAR DOOR SPEAKER REMOVAL/INSTALLATION .)
  5. Disconnect the connector.
    Fig 1: Disconnecting Rear Power Window Motor Connector
    G11434743Courtesy of MAZDA MOTORS CORP.
  6. Remove the bolts.
  7. Remove the rear power window motor.
  8. Install in the reverse order of removal. (See REAR POWER WINDOW MOTOR INSTALLATION NOTE .)
About FixVault