FixVault
Home › Mazda › 2018 › MX-5 Miata Club, Automatic Trans › Repair and Diagnosis › Restraints › Air Bag, SRS › On-Board Diagnostic - SAS Control Module - Two-Step Deployment Control System › DTC Inspection (SAS Control Module (Two-Step Deployment Control System)) › ODDTC Self Test

ODDTC Self Test

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "RCM".
  3. Verify the DTC according to the directions on the screen.
  4. After completion of repairs, clear all DTCs stored in the SAS control module. (See CLEARING DTC (SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)) ).
About FixVault