Air Fuel Ratio (A/F) Sensor Removal/Installation: Notes
Special Service Tool (SST)
| 49 L018 001 O2 sensor wrench |
Replacement Part
| Band Quantity: 1 Location of use: A/F sensor |
Clip band Quantity: 1 Location of use: A/F sensor |
WARNING:
- A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.
CAUTION:
- Do not allow flammable objects such as the taping for bundling a wiring harness to come into contact with the catalytic converter.
NOTE:
- If the A/F sensor is replaced, perform the "Operation After Replacing A/F Sensor" procedure.
- If penetrant lubricating spray penetrates the airflow hole of the A/F sensor, it could cause interference with the A/F sensor function.
- When removing the A/F sensor, wrap a rag around the lower position so that penetrant lubricating spray does not get sprayed into the airflow hole.