FixVault
Home › Mazda › 2019 › CX-5 Signature, 2.2L Eng VIN 2 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (VIN 2) › Dosing Control Unit Inspection › Using The M-MDS

Using The M-MDS

CAUTION:
  • The dosing control unit terminal voltage vary with change in measuring conditions and vehicle conditions. Always carry out a total inspection of the input systems, output systems, and dosing control unit to determine the cause of trouble. Otherwise, diagnosis will be incorrect.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Measure the PID value.
    • If PID value is not within the specification, follow the instructions in Action column.
About FixVault