FixVault
Home › Mazda › 2019 › CX-9 Signature › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Control System - Auto A/C › Rear Climate Control Unit Removal/Installation

Rear Climate Control Unit Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the rear console panel. (See REAR CONSOLE REMOVAL/INSTALLATION .)
  3. Remove the screws.
    G11433693Courtesy of MAZDA MOTORS CORP.
  4. Remove the rear climate control unit and rear ventilator grille from the rear console panel.
  5. Insert a tape-wrapped flathead screwdriver into the positions shown in the figure and move it in the direction of the arrows (1), and detach the tabs.
    G11433694Courtesy of MAZDA MOTORS CORP.
  6. Remove the rear climate control unit from the rear ventilator grille.
    G11433695Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
About FixVault