USB Port/SD Card Slot Hub Inspection
NOTE:
The integrity of the USB port/SD card slot hub cannot be determined from a single part. When inspecting the USB port/SD card slot hub, perform the following procedure.
- Connect the M-MDS to the DLC-2.
- Perform the DTC inspection for the connectivity master unit (CMU) and verify if any DTCs related to the USB PORT/SD CARD SLOT HUB is detected. (See DTC INSPECTION
.)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (Refer to the [DTC TABLE [CONNECTIVITY MASTER UNIT (CMU)]] in the workshop service information)