Touch Sensor Inspection: Notes

NOTE:

The integrity of the touch sensor cannot be determined from a single part. When inspecting the touch sensor, perform the following procedure.

Connect the M-MDS to the DLC-2.
Perform the DTC inspection for the BCM. (See DTC INSPECTION .)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [BODY CONTROL MODULE (BCM) (US)] .)
- If DTCs are not detected, go to the next step.
Access the PID using the M-MDS. (See PID/DATA MONITOR INSPECTION .)

Courtesy of MAZDA MOTORS CORP.