Setting method by operation of remote transmitter button

The following setting can be changed by operation of the remote transmitter button.

M-MDS Display	Function	Initial Setting	Setting Content	Control Unit
Lock Beep Volume.	The keyless beeper volume can be adjusted.	Medium	Off/Low/Medium/High	Start stop unit

Change the setting for the keyless beeper volume referring to the following procedure:
NOTE:
- If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
  - The ignition is switched to ACC or ON (engine off or on).
  - The driver's door is closed.
  - The liftgate is open.
  - The remote transmitter operation is not performed for approx. 10 s.
  - The UNLOCK button on the remote transmitter is pressed.
  - A request switch is pressed.
Fig 1: Keyless Beeper Volume Setting Changing Procedure Flowchart
Courtesy of MAZDA MOTORS CORP.